iPhone 13 Screen Replacement Cost

The iPhone 13 screen replacement cost is $170.00 AUD including installation and warranty. This repair and takes approximately 15 minutes to complete.

How Fone Fix Technicians Handle iPhone 13 Screen Replacements

The process of replacing an iPhone 13 screen involves distinct steps compared to earlier models like the iPhone 12, primarily due to design changes and updated components. At Fone Fix, our technicians are highly skilled in navigating these differences to deliver efficient and safe iPhone screen repair. Here’s an overview of the process:

Step 1: Powering Off and Diagnostic Check

As with all repairs, our technicians begin by turning off the device to prevent short-circuiting. They also conduct a quick assessment of the iPhone 13’s condition to ensure that no additional repairs are required beyond the screen replacement.

Step 2: Removing the Pentalobe Screws

The two Pentalobe screws located on either side of the Lightning port are removed using a specialised screwdriver. Though similar to the iPhone 12, the iPhone 13 has tighter tolerances, so extra care is taken during this step to avoid damaging the aluminum frame.

Step 3: Heating the Display’s Edges

Heat is applied to the edges of the iPhone 13 using an iOpener or heat gun to soften the adhesive. While this process is similar to the iPhone 12, the iPhone 13 uses slightly stronger adhesives, requiring precise heat control to avoid harming internal components such as the OLED panel.

Step 4: Lifting and Opening the Screen

Unlike the iPhone 12, the iPhone 13 features an updated internal layout, making the separation of the display a bit different. A suction cup and opening picks are used to carefully lift the screen. With the iPhone 13’s thinner bezels and delicate OLED display, our technicians take extra caution when separating the screen to prevent cracks or damage to the internal components.

Step 5: Disconnecting Battery and Display Cables

Once the screen is open, the battery is immediately disconnected to ensure safety. The internal layout of the iPhone 13 differs slightly from the iPhone 12 due to the A15 Bionic chip and updated component arrangement. Fone Fix technicians carefully remove the necessary shields and disconnect the display cables using professional tools like a spudger to avoid harming the connectors.

Step 6: Installing the New Screen

After safely removing the damaged screen, the new replacement is installed. As with the iPhone 12, Face ID sensors need to be carefully transferred to the new display, as mishandling them could permanently disable Face ID functionality. Our technicians make sure to align all connectors properly before securing them back into place.

Step 7: Testing and Resealing the Device

Once the screen is installed, the iPhone 13 is powered on, and our technicians run a comprehensive test. This includes checking the display’s brightness, touch responsiveness, and Face ID functionality. Additionally, the device is reassembled with new adhesive to maintain the phone’s water resistance.

While the process for replacing the iPhone 13 screen is similar to that of the iPhone 12, the differences in internal layout, display technology, and adhesive strength require precise handling to ensure a successful iPhone repair. At Fone Fix, we guarantee that every repair is performed with care, using high-quality replacement parts. For a more detailed look at the process, you can refer to the full iPhone 13 screen replacement process on iFixit.